山东青岛海琅智能装备有限公司动平衡、均匀性试验机新购项目招标公告

青岛海琅智能装备有限公司
动平衡、均匀性试验机新购项目
招标公告
1.招标条件
本招标项目动平衡、均匀性试验机新购项目（项目编号：TC269N020），招标人为青岛海琅智能装备有限公司，资金来源及出资比例为自有资金100%。该项目已具备招标条件，中招国际招标有限公司受招标人委托，现对动平衡、均匀性试验机新购项目进行公开招标。
2.项目概况与招标范围

标段 （包）	货物名称	数量	交货期	交货地点	备注
一包	均匀性试验机（全钢）	1（台套）	合同签订后12个月	招标人在阿尔及利亚投资建设的工厂
二包	动平衡试验机（全钢）	1（台套）	合同签订后12个月	招标人在阿尔及利亚投资建设的工厂
三包	动平衡测试机及均匀性测试机（半钢）	8（台套）	合同签订后12个月	招标人在阿尔及利亚投资建设的工厂
注：上述三个分包可兼投兼中。

3.投标人资格要求
投标人应具备的资格或业绩：
3.1 投标方有良好声誉，并且在近三年内向国内、外用户提供过同类设备，并已经投入正常使用，设备运行良好。
3.2 投标人必须具备相应生产资质以及投标产品3年以上的生产制造经验，响应双星技术协议要求，且与全球排名前30或国内排名前10的轮胎企业有上述物资成功合作的案例，能提供合同、订单、发票、验收报告等在内的见证性资料(承接国外项目必须具备国外案例)。
是否接受联合体投标：接受
未领购招标文件是否可以参加投标：不可以
4. 投标报名
凡有意参加投标者，请于2026年5月15日起至2026年5月22日，每日上午9时至12时，下午14时至17时(北京时间，下同)，在中招国际招标有限公司山东分公司(山东省青岛市市北区徐州路160号利群·宇恒大厦19A)报名。
5. 采购文件的获取
凡通过上述报名者，请于2026年5月15日起至2026年5月22日，每日上午9时至12时，下午14至17时，在中招国际招标有限公司山东分公司(山东省青岛市市北区徐州路160号利群·宇恒大厦19A)持法定代表人授权委托书免费获取招标文件
6. 投标文件的递交
6.1 递交投标文件截止时间 / 开标时间
2026年6月4日09时30分00秒
6.2 递交投标文件地点 / 开标地点
青岛颐瑞凯莱酒店会议室三（青岛市黄岛区月亮湾路1号）
7.发布公告的媒介
中国招标投标公共服务平台、中招国际招标有限公司网站，其他媒体转载无效。
8.联系方式
采购人：青岛海琅智能装备有限公司

联系人：历彦鹏
电话：+86-532-67710776、18754276083
采购代理机构：中招国际招标有限公司

地址：中国北京市海淀区学院南路62号中关村资本大厦

联系人：赵明坤、崔邈
电话：0532-85791235、16653179701

日期：2026年5月15日
QINGDAO HAILANG INTELLIGENT EQUIPMENT CO., LTD.
New Procurement Project for Dynamic Balance & Uniformity Testing Machine
Invitation for Bids

1. Tender Conditions
This tender project entitled New Procurement Project of Dynamic Balance and Uniformity Testing Machine (Project No.: TC269N020) is tendered by QINGDAO HAILANG INTELLIGENT EQUIPMENT CO., LTD. The fund source and contribution ratio is 100% self-owned funds. The project has met all tender conditions. Entrusted by the Tenderer, China Tendering International Co., Ltd. now invites public bidding for the New Procurement Project of Dynamic Balance and Uniformity Testing Machine.

2. Project Overview and Tender Scope

Bid Section	Name of Goods	Quantity	Time of Delivery	Place of Delivery	Remark
One	Uniformity Tester (All-Steel)	1 sets	12 months after the contract is signed	The factory invested and constructed by the bidder in Algeria
Two	Dynamic Balancing Machine (All Steel)	1 sets	12 months after the contract is signed	The factory invested and constructed by the bidder in Algeria
Three	Dynamic Balance Tester and Uniformity Tester (semi-steel)	8 sets	12 months after the contract is signed	The factory invested and constructed by the bidder in Algeria
Note: The above four subcontracts can be bid for and won simultaneously.

3. Bidder Qualification Requirements
Qualifications or performance that the bidder should possess:
3.1 The bidder has a good reputation and has supplied similar equipment to domestic and international users in the past three years, which has been put into normal use with the equipment operating well.
3.2 The bidder must have the corresponding production qualifications and more than three years of manufacturing experience for the tendered products, comply with the Double Star technical agreement requirements, and have successful cooperation cases with the above-mentioned products with tyre companies ranked in the top 30 globally or top 10 domestically, and be able to provide evidential materials including contracts, orders, invoices, and acceptance reports (foreign projects must have foreign cases).
Joint Bids: Accepted
Bid without purchasing the bidding documents: NOT Accepted

4. Bid Registration
Any party interested in participating in the bidding shall register at the Shandong Branch of China CNTC International Tendering Corporation (19A, Liqun · Yuheng Building, No. 160 Xuzhou Road, Shibei District, Qingdao, Shandong Province) from May 15, 2026 to May 22, 2026, between 9:00 AM and 12:00 PM, and 2:00 PM to 5:00 PM (Beijing time, same below).

5. Obtaining the Procurement Documents
Any bidder who has successfully registered through the above procedures shall obtain the bidding documents free of charge by presenting a Letter of Authorization from the Legal Representative at the Shandong Branch of China CNTC International Tendering Corporation (19A, Liqun · Yuheng Building, No. 160 Xuzhou Road, Shibei District, Qingdao, Shandong Province) from May 15, 2026 to June 22, 2026, between 9:00 AM and 12:00 PM, and 2:00 PM to 5:00 PM daily.

6. Submission of Bidding Documents
6.1 Deadline for Submission of Bidding Documents / Bid Opening Time
09:30:00, June 4, 2026
6.2 Submission Location for Bidding Documents / Bid Opening Location
Meeting Room III, Qingdao Yirui Kai Lai Hotel (No. 1 Yueliangwan Road, Huangdao District, Qingdao)
7. Media for Publishing Tender Announcements
China Tendering and Bidding Public Service Platform, and the website of China CNTC International Tendering Corporation. Reprints by other media are invalid.

8. Contact Information
Purchaser: QINGDAO HAILANG INTELLIGENT EQUIPMENT CO., LTD.
Contact Person: Mr. Li Yanpeng
Tel: +86-532-67710776、18754276083
Procurement Agent: China CNTC International Tendering Corporation
Address: Zhongguancun Capital Building, No. 62 South Xueyuan Road, Haidian District, Beijing, China
Contact Persons: Zhao Mingkun, Cui Miao
Tel: 0532-85791235, 16653179701
Date: May 15, 2026

202605151036256229269729412